Panel Filters

Panel FiltersPanel Filters

Panel filters are used in industries to retain particles ranging from 1 micron to 50 micron. These filters are basically air intake filters, which is working with negative pressure of systems. These filters are further classified as.»  Primary Filters
»  Secondary Filters Primary filters Primary filters are used for coarse filtration for removal of particles in range of 10 to 50 microns. Primary filters retain coarse particles to avoid further loading on secondary filters & enhance the life of secondary filter. Primary filters are cleanable in nature to obtain good shelf life.Features
»  Low pressure drop due to pleated configuration
»  Easy to install
»  No bypassing
»  Washable & reusable
»  High dirt holding capacity
»  Good mechanical strength
»  Retrofit to any standard make
align=”left” valign=”middle” height=”15″>

Technical Specifications

Configuration
»  Flange type & Box type

Sizes available
»  610 mm x 610 mm x 50 mm / 100 mm / 150 mm / 300 mm
»  545 mm x 545 mm x 50 mm / 100 mm / 150 mm / 300 mm
»  Customized sizes are available on request

Filtration Rating
»  10, 15 , 20, 25 micron & more

Filtration efficiency
» 
 80 – 90 %

Frame Material

»SS 304 / GI (Galvanized Steel) / Aluminum Powder coated / CRC powder coated or Zinc coatedFilter media
»  HDPE Media / Synthetic Fiber Media / Spun bonded polyester media Secondary Filters Secondary filters are used for fine filtration for removal of particles in the range of 1 to 10 microns. Secondary filters are made from selective fiber media for better efficiency.Features
»  Low pressure drop due to pleated configuration
»  Easy to install
»  No bypassing
»  Washable & reusable
»  High dirt holding capacity
»  Good mechanical strength
»  Retrofit to any standard make
Technical Specifications

Configuration

»  Flange type & Box type

Sizes available

»  610 mm x 610 mm x 50 mm / 100 mm / 150 mm / 300 mm
»  545 mm x 545 mm x 50 mm / 100 mm / 150 mm / 300 mm
»  Customized sizes are available on request

Filtration Rating

»  1, 5 , 10 micron & more

Filtration efficiency

»  80 – 90 %

Frame Material

SS 304 / GI (Galvanized Steel) / Aluminum Powder coated / CRC powder coated or Zinc coated.

Filter media

»  HDPE Media / Synthetic Fiber Media / Spun bonded polyester media

 

Pocket Filter

 

Pocket FilterPleated Pocket Filter

Pocket filter are made up of non woven synthetic fiber media to ensure retention of solid particles up to the stipulated micron rating. These are covered with supporting layer of spun bonded media to avoid any type of particles or fiber migration, even after high pressure build up. Media are sealed with thermal bonding or stitching as per requirement.

Features & Benefits

» Pocket filters offer high air volume
» Low pressure drop
» High dirt holding capacity
» Good mechanical strength
» Made of selective fibrous material
» Easy to install
» Retrofit to any standard make

Technical Specifications

Sizes

» Ø 590 x 590 x 590 mm
» Ø 610 x 610 x 760 mm
Customized Sizes Are Available

Filtration Rating

» 1, 5, 10, 25 micron
Applications

» Chemicals
» Pharmaceuticals
» Gas turbine compressors
» Food and Beverages
» Fertilizer
» Spare painting booths

Gas Turbine Air Intake Filter

 

 

 

Gas Turbine Air Intake Filter cartridges are modern and reliable for air intake applications. They ensure high efficient filtration of dust and other contaminants even in the most polluted environments. Normally these are made of mixture of polyester & cellulose and some time 100% polyester media. These media have much better pleat ability & dimensional stability. Pleated filter media offer high filtration efficiency, very fine retention level, easy clean ability & aesthetically good product than other normal filter media.

Features & Benefits

» Easy to clean
» All polyester materials are washable
» High flow efficiency
» High Air to cloth ratio
» Large spacing
» Cleanable without damaging filter media
» Retrofit for most standard makes

Technical Specifications

Filter media

» Mixture of Cellulose & Polyester Media
» 100 % spun bonded polyester

Configuration

» Cylindrical
» Conical

Sizes

Sr. No. Diameter Of element Length Of filter Element
1 325 mm 647 mm
2 325 mm 660 mm
3 325 mm 673 mm
4 445 mm 660 mm

Pleated Dust Collection Cartridges

Pleated Dust Collection Cartridges Pleated Dust Collection Cartridges

Pleated dust collection cartridges are made up of 100 % spun bonded polyester media, like pleated dust collection bags media with different coatings on it, as per the requirement of applications. Construction wise Pleated dust collection bags & cartridges are one & the same, they are differentiated just for variation of filtration area. Dust collectors manufacturers / OEMs can replace conventional tube bags with pleated dust collection bags & cartridges with minor changes in the present equipment design. This polyester media is made up of high tenacity filament yarn without using any binding agent. Thus hard finished material is very stable against hot gas attack & structurally durable. This unique & hard finished material provides features of good pleat ability, high durability, and unique structure of very fine filament yarn which offer high performance in filtration. Thermally tight bonded media provide washability, excellent pleatability, stable structure, fine dust release & good resistance of particle penetration in to the media. This filter media is pleated in different pleated depths & heights to accommodate desired filtration area.

Construction

Pleated spun bonded polyester filter media is placed in a cylindrical configuration with support of metal core & encapsulated with metal end caps to form a pleated dust collection cartridge. The end caps are configured to mount as clean side or dirt side fitment. In case of metal caps these cartridges are supported with soft sponge rubber sealing to ensure positive sealing of filter while fitment.

Features & Benefits

» High filtration area up to 20 m2
» Universal Fixing arrangements
» Open Pleat Spacing
» Low Consumption Of Compressed Air (For Cleaning)
» High Efficiency Due To Surface Filtration
» Very High Air To cloth Ratio
» Very high filtration efficiency

Technical Specifications

Filter media

 

» Spun Bonded Polyester Media

 

Area weight of filter media

 

» 170 gms/m2
» 200 gms/m2
» 260 gms/m2

 

Coating

 

» PTFE coating for oil & moisture removal
» Aluminum coating for antistatic application
» Stainless steel coating for antistatic application
» Fire retardant coating
» PTFE lamination for very stick dust

 

Sizes

 

Sr. No. Diameter Of element Length Of filter Element
1 150 mm 500 mm
2 150 mm 1000 mm
3 150 mm 1400 mm
4 150 mm 2000 mm
5 225 mm 500 mm
6 225 mm 1000 mm
7 225 mm 1400 mm
8 225 mm 2000 mm
9 325 mm 300 mm
10 325 mm 500 mm
11 325 mm 606 mm
12 325 mm 1000 mm
13 325 mm 1400 mm
Fitment configuration

 

» Clean Side Fitment (Model: 2 & 3)
» Dirt Side Fitment (Model : 1)

 

Filtration area

 

» 0.96 m2 to 20.0 m2

 
Applications

» Pharmaceuticals
» Steel & Power
» Powder coating
» Shot Blasting
» Cement
» Chemicals
» Metals & Minerals
» Paints & Pigments

 

 

 

Pleated Dust Collection Bag

Pleated Dust Collection BagsPleated Dust Collection Bag

Pleated dust collection bags are now widely used in the field of dust collection system. These are made up of 100 % Spun Bonded polyester media with different coatings on it, as per requirement of applications.This spun bonded media are pleated in different pleated depths & heights to accommodate desired filtration area. Spun bonded filter media offers surface filtration, due to which pleated bags offer very high throughput & lower pressure drop across the filter compared to any conventional tube type filter bags. Pleated configuration offers almost 3 – 4 times higher filtration area compared to conventional bags.

Construction

Pleated spun bonded polyester filter media is placed in a cylindrical configuration with support cage of Galvanised / stainless steel / Polypropylene & encapsulated with EPDM / Natural rubber / Polyurethane or metal end caps to form a pleated dust collection bag. Longitudinal joints of pleated bags are ultrasonically fused for leak proof & very stable design. The end caps are configured to mount as clean side or dirt side fitment. In case of metal caps these bags are supported with soft sponge rubber or snap band cuff sealing to ensure positive sealing of filter while fitment.

Features & Benefits

» Filter area 3 to 4 times Larger than traditional filter bag
» Open Pleat Spacing
» Low consumption of compressed air (for cleaning)
» High efficiency due to surface filtration
» Reduction in downtime & maintenance
» Easy to install & remove
» Top and Bottom in EPDM, Natural Rubber,polyurethane or Metal end caps
» Leak proof design
» Very stable; do not break or fall through sheet
» Cages & venture are integral part of bags,hence no cages or venture required

Technical Specifications

Filter media

» Spun Bonded Polyester Media
» Pleatable PPS Media
» Pleatable Nomex Media

Area weight of filter media

» 170 gms/m2
» 200 gms/m2
» 260 gms/m2

Coating

» PTFE coating for oil & moisture removal
» Aluminum coating for antistatic application
» Stainless steel coating for antistatic application
» Fire retardant coating
» PTFE lamination for very stick dust

Sizes

» Ø 160 mm x 500 mm Long
» Ø 160 mm x 1000 mm Long
» Ø 160 mm x 1400 mm Long
» Ø 160 mm x 2000 mm Long

Filtration area

» 0.96 m2 to 5.5 m2
Applications

» Pharmaceuticals
» Steel & Power
» Powder coating
» Shot Blasting
» Cement
» Chemicals
» Metals & Minerals
» Paints & Pigments
» Pneumatic Conveying
» Spray Dryer