Cartridge Filter Housing

                  

Cartridge filter system offers wide range of flow capacities & contaminant holding capacities. Cartridge filter housing diameters can accommodate around 1 to 500 cartridges. Cartridge filters are normally used as polishing filter in almost all process industries. Cartridge filter is constructed of filter housing, filter cartridges, tube sheet, positive sealing arrangement for cartridge depending upon type of cartridge & choice of end connections. Positive sealing arrangement for cartridge filter assures no particle migration or fiber migration, even after high differential pressures.

Operation

Contaminated fluid enters the housing and is distributed evenly around the filter cartridges. Filtration takes place from outside to inside. Solids are collected on the outside of filter cartridges & clear filtrate is collected at outlet.

Features & Benefits

» Low pressure drop
» High dirt holding capacity
» Zero hold up design
» Permanently piped housing are opened without special tools and without disturbing the piping
» Machined cover gasket groove provide positive O-Ring sealing
» Easy to clean
» In-line inlet and outlet high flow rates
» Positive sealing arrangement to avoid bypassing
» Suitable for double open end (DOE), Code 7 (226 O’-Ring) & 222 O’-Ring type filter cartridge
» Accommodates 10″, 20″, 30″, 40″, 50” & 60” long filter cartridges.
» End connections for ¾” to 24″ pipe
» V posts or threaded center posts
» Quick opening tri clovers design
» Easy to operate & low maintenance
» Low down time
» Flow rate up to 2000 m3/hr & More
» Customized design available
» Housings are permanently piped
» All housings made from SS 316 L, SS 316 & SS304 are mirror polished & electro polished to resist adhesion of dirt and scale
» Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel
» ASME code stamp available
» Duplex / Triplex / Jacketed cartridge filter unit designs are available
» High temperature & high pressure design are available

Special Options

» Sanitary fittings and construction
» Higher pressure rating
» Housings of alloy steel
» Steam jackets
» Special outlet locations
» Optional cartridge sealing methods for 226, NPT, etc
» High temperature gasket designs

Technical Specifications

Sizes (Cartridge filter housings suitable for)

 

» 1 No. To 500 Nos. Of Cartridges in Single Housing
» 2” , 2.5” , 4” , 6” & 8” Diameter of Cartridge
» 10” , 20” , 30” , 40” , 50” & 60” Length of Filter cartridge

 

Flow Rate

 

» Capacity: Up to 2000 m3 /hr & more

 

Material of construction

 

» FRP Housing new product
» SS 316L
» SS 316
» SS 304
» Super Duplex,Duplex Stainless steel 2205
» CARBON STEEL (ALL GRADE)
» MILD STEEL
» ALLOY METALS
» POLYPROPYLENE
» LEAD LINING on Any Metal
» RUBBER LINING on Any Metal
» PTFE LINING on Any Metal
» PTFE coating on any metal

 

Cartridge filter housing suitable for filter cartridges of

 

» Double Open End (DOE) Type
» Code 7 (226 O’ Ring) Design
» Code 3 (222 O’ Ring) Design
» NPT Threaded Connection Type

 

Gasket / O Ring Material

 

» Neoprene
» Nitrile
» Silicone
» Viton
» Buna N
» EPDM
» PTFE
» Spiral Wound
» CAF

 

End connections available

 

» NPT / BSP Threaded
» Flanged Table E / Table F
» ANSI B 16.5 Flanged
» DIN Standard
» Tri Clover Adaptors
» SMS /Dairy End Connection
Applications

» Pharmaceuticals » Petroleum Derivatives
» Water Treatment » Coolants
» Paints & Inks » Food & beverages
» Bore Well water » Dairy
» Dyes & Intermediates » RO Pre filtration
» Processing Chemicals » & Many More

 

FCI   Description   Style   Material   Size   Configuration   Design
                         
     SCF – Single Cartrdige Filter Housing   S1 – Style -1   A-SS 304     203 – 20″ x 3 Nos. Of Ø 2.5″   1 – DOE   Duplex
                         
    MCF – Multiple Cartrdige Filter Housing   S2 – Style -2     B-SS 316     204 – 20″ x 4 Nos. Of Ø 2.5″   2 – SOE   Simplex
                         
        S3 – Style -3     C-SS 316 L     304 – 20″ x 4 Nos. Of Ø 2.5″        
                         
             D-CARBON STEEL     404 – 20″ x 4 Nos. Of Ø 2.5″        
                         
              E-CSRL            
                         
              F-ASTM A 106            
                         
              G-ASTM A 517            
                         
              H-ASTM A 516