Enquiry QuestionariesInformation required to select the right filtration system 1.0 Application: 1.1 Individually Centralized 1.2 No of Machine If Centralized 0.2. M/C Operation : 2.1 M/C Spindle Speed In RPM 2.2 Machine Model and Make 2.3 Space available 3 Dimension 2.4 Lay out / Location 2.5 Size of particles if any other please specifyfinemediumcoarsesharpcharacterText 2.6 MOC Other contamination please specifyALCuCSCLSSAlloysText 2.7 Muck generation in KG/hr 2.8 Height of the coolant outlet 3.0 Coolant 3.1 Coolant name and make 3.2 Flow Rate in IPM 3.3 Coolant Type water basedemulsionneat oil3.4 % of oil for emulsiom 3.5 pH value 3.6 Specific gravity 3.7 Acidic/Alkaline 3.8 Flash point 4.0 Viscosity 4.1 Coolant pressure required at machine 4.2 Coolant pressure available at the discharge 4.3 Efficiency in existing system 4.4 Filtration efficiency is required 4.5 Frequency of change of coolant and quantum of topping 4.6 Tramp oil Significance 5.0 Accessories (optional) : 5.1 Clean Coolant Tank5.2 Dirty Coolant Tank5.3 Bottom Tray5.4 Pumps5.5 Control Panel And Cabling5.6 Magnetic Seprator5.7 Instruments 5.8 Any Other Equipment's and components 6.0 Process Information Flow rate Expected Solids Loading in feed would be Expected Solids Loading in feed would be 6.3 Work Place Material OperationFinish ProductClean Return PressureText VerificationPlease enter any two digits *Example: 12This box is for spam protection - please leave it blank:
