PES (Poly Ether Sulphone) Filter Cartridge

PES (Poly Ether Sulphone) Cartridge                          

PES Cartridges are made of poly ether Sulphone with uniform pore distribution to ensure maximum performance in bacterial retentions. It’s upstream & down stream polyester support ensures resistance to pressure shocks. Polyethersulphone membrane is hydrophilic in nature, it allows easy integrity testing for all applications where daily controls are required. The membrane possesses broad chemical compatibilities & contains no surfactants. PES Cartridges are produced in controlled environments & under stringent production conditions that ensure filter quality & cleanliness. These are assembled integrally by thermowelding. This process minimizes the presence of oxidization of substance & yield a durable filter cartridges suitable for extended use. This can be sanitized by chemical agents or by inline steaming. PES and polypropylene, the unique two materials used in cartridge manufacturing are chemically inert, not shedding and biologically safe according to F.D.A., USP and EEC requirements for pharmaceutical and food contact use. The filtration area of each cartridge is as high as 0.7 m2. Therefore it offers high flow rate, low pressure drop & long service life.

Features & Benefits

» PES Membrane is inherently hydrophilic with excellent hydrolytic stability & chemical compatibility
» Specific pore size distribution for full bacterial retention to ensure sterile effluent even under process upsets
» End caps and connectors are sealed by thermal bond, free from binder.
» Low pressure drop and high flow rate due to high filtration area of 0.7 m2 Per 10” cartridge
» Absolute rated
» Autoclave or in situ steam sterilization features
» Integrity test is possible
» FDA approved

Technical Specifications

» Sizes 10”, 20”,30”40” Long
» Micron Rating 0.05, 0.1, 0.2, 0.45 , 1 Micron
» Filtration Area More Than 0.7 m2 Per 10” cartridge
» Outer Diameter 69 mm
» Inner Diameter 28 mm


» Double Open Type (DOE Type)
» Code 7S (226 O’ Ring Design / Bayonet)
» Code 7F (226 O’ Ring Design / Flat)
» Code 3S (222 O’ Ring Design / Bayonet)
» Code 3F (222 O’ Ring Design / Flat)


» Filter Media PES (Poly Ethersulphone) Membrane
» Support Media Polypropylene fiber
» Inner Core High strength polypropylene
» Outer Core High strength polypropylene
» End Caps High strength polypropylene
» O Ring / Gaskets EPDM / Buna N / Silicone / Viton


» Pharmaceuticals
» Food & Beverages
» DI water Filtration

    PES   Diameter of cartridge   Micron Rating   Length Of Cartridge   Configuration
    Poly Ether Sulphone Pleated   68 MM   0.2 Micron   10″ Length   A – 226 O’ Ring With Bayonet Design
            0.45 Micron   20″ Length   B – 226 O’ Ring With Flat Design
            0.65 Micron   30″ Length   C – 222 O’ Ring With Bayonet Design
                 40″ Length   D – 222 O’ Ring With Flat Design
                      E – DOE Type
Posted in Filters Cartridge.