Polypropylene Pleated Cartridge

Polypropylene Pleated Cartridge                 

Polypropylene filter cartridges are precisely manufactured for use in critical filtration applications within food, pharmaceuticals, biotech, dairy, beverages, brewing, semiconductor, water treatment & other demanding process industries.Polypropylene pleated cartridges use the very latest gradient density micro fiber media technology to provide a combination of excellent micron ratings, high flow rates and high contaminant holding capacities. A special combination of polypropylene media with variation in the fiber diameter creates a gradient density matrix, ranging from open on the outside to finer on the inside, thereby providing a filter with in filter, which considerably increases contamination holding capacity & throughputs.
All components used in the manufacturing process are biologically safe, chemically inert and meet FDA and other international quality requirements. Polypropylene offers an extremely broad chemical compatibility making it suitable for many applications.
Features & Benefits

» All polypropylene construction
» Absolute & nominal efficiency
» 0.1 to 40 Micron ratings
» Gradient density micron fiber media
» High surface area more than 0.5 m2 per 10″ filter
» Robust outer cage
» Biologically safe
» Wide chemical compatibility
» No fiber migration
» Thermally welded construction
» FDA approved filters
» End connections to fit all standard housings

Technical Specifications

» Sizes 10”, 20”,30”,40” Long
» Micron Rating 0.1, 0.2, 0.45 , 1 , 5 , 10 , 20 Micron
» Outer Diameter 69 mm
» Inner Diameter 28 mm

Configuration

» Double Open Type (DOE Type)
» Code 7S (226 O’ Ring Design / Bayonet)
» Code 7F (226 O’ Ring Design / Flat)
» Code 3S (222 O’ Ring Design / Bayonet)
» Code 3F (222 O’ Ring Design / Flat)

Construction

» Filter Media 100 % Melt blown micro denier polypropylene fiber
» Support Media Polypropylene fiber
» Inner Core High strength polypropylene
» Outer Core High strength polypropylene
» End Caps High strength polypropylene
» O Ring / Gaskets EPDM / Buna N / Silicone / Viton

Applications

Fine Chemicals and Pharmaceuticals
» D.I. Water
» R.O.Pre filtration
» Biological Fluids
» Oral Drugs
» Ophthalmic Liquids

Photographic Film & Paper
» Anti-Halation Coatings
» Developer Chemicals
» Emulsions
» Gelatins

Beverages
» Wine
» Alcohols
» Fruit Juice
» Beer

Electronic and Semi-Conductor
» De-ionized Water Prefiltration
» Magnetic tapes
» Premix Resins
» Tape Coatings
» Photoresists
» Metal Oxide Dispersions
» Solvents


 
    PPL   Diameter of cartridge   Rating   Micron Rating   Length Of Cartridge   Configuration
                         
    Polypropylene Pleated   68 MM   A-Absolute Rating   0.2 Micron   10″ Length   A – 226 O’ Ring With Bayonet Design
                         
            B-Nominal Rating   0.45 Micron   20″ Length   B – 226 O’ Ring With Flat Design
                         
                001 Micron   30″ Length   C – 222 O’ Ring With Bayonet Design
                         
                005 Micron    40″ Length   D – 222 O’ Ring With Flat Design
                         
                010 Micron         E – DOE Type
                         
                030 Micron        
                         
                060 Micron        
 
Posted in Filters Cartridge.